Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : How to replace the cabin filter of the 2015 Hyundai Tucson.

Hyundai Tucson - Video tutorial

Model: Hyundai Tucson LM, MK 2 - Years 2010-2015
Part: Cabin air filter
Operation: How to replace the cabin filter of the 2015 Hyundai Tucson.

In the following guide dedicated to your second-generation Hyundai Tucson (year 2015), we will discover step by step how to quickly and safely replace the cabin air filter. Once you have parked the car and turned it off, move to the passenger seat and open the glove compartment. Then, act on the safety hook located on the right side of the compartment and proceed with its disassembly. Finally, locate the filter box in the back and, once you have removed the protective cover, replace the old filter with the new one.


Posted on 2 April 2023 by ScegliAuto



How to replace the cabin filter of the Hyundai Tucson 3.
Hyundai Tucson (2015-2021 / MK 3, TL) The air filter inside the cabin of your third generation Hyundai Tucson (years 2015-2021) needs to be replaced periodically, and in this new mini gui
How to replace the cabin filter on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To be able to replace the cabin filter of the Hyundai Tucson you have to open the glove box located on the passenger side, by unhooking the side pins
How to replace the cabin air filter of the Hyundai Tucson 3.
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the cabin air filter in your Hyundai Tucson 3 (year 2019-2021), simply follow the steps described below. First, reach the passenger side a

    Frequently Asked Questions

    • Tucson 2015-2021 - Where is the Hyundai Tucson cabin air filter located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos