Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Cabin Fuse Box on a 2021 Hyundai Elantra

Model: Hyundai Elantra CN7, MK 7 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

With the instructions in this mini guide, you can quickly find the fuse box inside the cabin of your 2021 Hyundai Elantra in just a few seconds. First, reach the driver's seat and ensure the car is completely off. Then, open the small compartment located on the lower left side of the dashboard and remove it by hand.

Once this simple operation is complete, locate the various fuses present, and you are done. Before performing any work on them, you must disconnect the battery.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Where is the cabin fuse box located in the Hyundai Elantra 3?
Where is the cabin fuse box located in the Hyundai Elantra 3?
Hyundai Elantra (2000-2006 / MK 3, XD) If you don't know where the cabin fuse box is located in your Hyundai Elantra Mk3, you just need to pay attention to the steps described in the follo…
Where is the Fuse Box on the 2022 Hyundai Elantra?
Where is the Fuse Box on the 2022 Hyundai Elantra?
Hyundai Elantra (2021-2026 / CN7, MK 7) The 2022 Hyundai Elantra has two fuse boxes. The first fuse box is located under the bonnet, specifically near the left headlamp. The second fuse box…
Where is the Fuse Box on the Hyundai Elantra?
Where is the Fuse Box on the Hyundai Elantra?
Hyundai Elantra (2021-2026 / CN7, MK 7) The C7 Hyundai Elantra contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the driver's glove compartment. I…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos