Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : How to replace the car shock absorber

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Shock absorbers
Operation: How to replace the car shock absorber

Shock absorbers are among the components of the automobile that are most subject to stress. They usually need to be replaced between 70,000 and 80,000 km. You don't need to be a professional to do this and the guide below shows you how. First, the car must be raised and the wheels removed. In this way it will be possible to unscrew the screws that hold the shock absorbers fixed. Using mechanical clamps, the upper attachments can be disconnected and old worn shock absorbers can be removed. In this way, the new shock absorbers can be installed and can be purchased from a trusted dealer.


Posted on 11 September 2023 by ScegliAuto



Disassembly of a shock absorber support of a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Let's see in this video how to intervene on the disassembly of a shock absorber support of a Hyundai Getz. We place our car on a column bridge, loose
How do you replace the rear shock absorber of the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) In order to replace the rear shock absorber of the Hyundai Getz, you need to lift the car using a jack or a lift, so that the corresponding wheel is
Replacement rear shock absorbers of a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Do we want to replace the shock absorbers of a Hyundai Getz? We lift the car with a jack and remove the rear wheel to access the wheel hub. Unscrew t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos