Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Disassembly of a shock absorber support of a Hyundai Getz

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Shock absorbers
Operation: Disassembly of a shock absorber support of a Hyundai Getz

Let's see in this video how to intervene on the disassembly of a shock absorber support of a Hyundai Getz. We place our car on a column bridge, loosen the pins with a telescopic wrench and lift it to a preferred height to intervene. We unscrew the pins and remove the rim, then we begin to unscrew the shock absorber locking pins with a socket wrench or a compressed air drill. We unscrew the pins of the shock absorber in the upper part (engine compartment) and detach the same from the car body. Once the shock absorber has been extracted, let's disassemble it with the help of a special machine for pressing the spring. We reassemble the shock absorber with the new spring support. Let's get ready to mount the piece on the car by proceeding backwards.


Posted on 10 October 2023 by ScegliAuto



How do you replace the rear shock absorber of the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) In order to replace the rear shock absorber of the Hyundai Getz, you need to lift the car using a jack or a lift, so that the corresponding wheel is
Replacement rear shock absorbers of a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Do we want to replace the shock absorbers of a Hyundai Getz? We lift the car with a jack and remove the rear wheel to access the wheel hub. Unscrew t
How to replace the drive shaft boot in Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) In this tutorial we can see how to replace the drive shaft boot in the Hyundai Getz, a simple operation if you have good manual skills. We start by j

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos