Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : Reset the service light on the Volkswagen Hyundai I30 MK3.

Hyundai I30 - Video tutorial

Model: Hyundai I30 PD, MK 3 - Years 2016-2023
Part: Checks and maintenance
Operation: Reset the service light on the Volkswagen Hyundai I30 MK3.

Approaching the expected mileage for the Hyundai I30 MK3's maintenance, a message appears on the instrument panel to remind us to perform the operation. After completing the entire procedure, we need to reset the system that handles the notification. Sitting in the driver's seat, with the doors closed and the handbrake pulled, we turn on the instrument panel. Using the controls located on the right spoke of the steering wheel, we select the settings menu. Within this menu, we select "maintenance interval" and press and hold the "ok" button until the confirmation request appears. We release the button and briefly press it again.


Posted on 3 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • I30 2011-2016 - What are the problems with the Hyundai I30 Wagon? Read Answer
    • I30 2007-2012 - How to fix a Hyundai I30 steering column problem? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos