Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Understand the Wiring of the Passenger Side Step Lighting on the Infiniti QX60

Model: Infiniti QX60 L50 - Years 2013-2020

In this video, you will learn how to wire the passenger side step lighting on the Infiniti QX60. When the passenger side step light does not turn on, you need to determine the cause of the failure. The safest way to do this is to remove the plastic panel along the passenger seat and move the carpet to expose the wires. Carefully follow the wire that runs from the step to the opposite end. You will need to open the panel located on the dashboard to continue tracing it. At the end, you will find a bulb or a fuse that will likely need to be replaced.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Infiniti QX60?
How to Replace the Cabin Filter on the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) To replace the cabin filter on the Infiniti QX60, you need to detach the carpeted panel located in the footwell on the passenger side, on the left si…
What is the fuse layout of the Infiniti QX60?
What is the fuse layout of the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) In this video we can see where the fuse boxes of the Infiniti QX60 are located and what their respective diagrams are, useful in case we need to chec…
How to Change the Cabin Air Filter on an Infiniti QX60
How to Change the Cabin Air Filter on an Infiniti QX60
Infiniti QX60 (2013-2020 / L50) Change the cabin air filter - also known as the pollen filter - on an Infiniti QX60. The cabin filter compartment is located under the glove box, on …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos