Do it yourself
| ||||
|
Infiniti QX60 - Video tutorial
Model: Infiniti QX60
L50
- Years 2013-2020 To replace the cabin filter of the Infiniti QX60, you must remove the panel with the carpet located in the footrest compartment on the passenger side, on the left side of it. After this panel has been removed, it will be possible to access the components in the lower part: you will be able to locate the filter housing, which should be removed simply by pulling it out. Once the old filter has been removed, you can insert the new one and cover everything with the side cover of the footrest compartment.
Posted on 29 May 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |