Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service of the Iveco Daily 2011

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

In this video, we see how to reset the service light on a 2011 Iveco Daily. We need to turn on the dashboard - make sure the doors, front hood, and possibly the rear hatch are closed properly. Then, press the accelerator pedal and hold it down for at least ten seconds. After this time has passed, press the brake pedal all the way down, ten times. Release both pedals quickly at the same time and turn off the dashboard. Turn it back on to check if the service light has turned off, and you're done.

Posted on 11 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Below we will see the procedure on how to reset the service light for the routine maintenance of the oil change on the Iveco Daily. First, we get on …
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) After performing the oil change, it is necessary to reset the service light; let's see how to reset it on the Iveco Daily. First, we get on board the…
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos