Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on an IVECO DAILY II 1996 - 2006?

Model: IVECO Daily MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

Don't worry if the service light is on, to reset it follow these simple steps. Turn on the ignition without starting the engine so that the dashboard lights up. Then locate the reset button on the dashboard, which is usually located near the instrument panel or near the steering wheel depending on the version.

Hold down this button for about 10-15 seconds. The service light should turn off. If it doesn't work, try turning off and on the ignition or consult the manual for any specific model variations.

If the light remains on, there may be a mechanical or electronic problem that requires professional inspection. If the light remains on or if you don't feel comfortable operating in do-it-yourself mode, contact an experienced mechanic.


Posted on 6 October 2025 by ScegliAuto


Related tutorials

How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel and check that the light is illuminated. To reset it, p…
How to Reset the Service Light on an Iveco Daily
How to Reset the Service Light on an Iveco Daily
IVECO Daily To reset the service light on your Iveco Daily, turn the key to activate the instrument panel and ensure the light appears. To reset it, press the ac…
How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press and hold the accelerator and brake pedals while the instrument cluster is off. Then, turn the ig…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos