Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform a reset of the onboard computer of the Iveco Daily?

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Warning light – error code

Performing a reset of the onboard computer of the Iveco Daily is a very simple procedure that can be done independently with the visual support of our short video tutorial. We enter our vehicle and turn on the instrument panel, then press the CD eject button for 20 seconds and then press the button to turn on the onboard computer. Once it is turned on, we follow the instructions provided to complete the system restart. Finally, we wait a few seconds for the reset to be completed and turn off the vehicle, then restart it to check if the reset was successful.

Posted on 27 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to set the onboard clock of the Iveco Daily
How to set the onboard clock of the Iveco Daily
IVECO Daily (2014-2024 / MK 5) To set the clock on the Iveco Daily vehicle's onboard computer, we need to turn on the instrument panel and the onboard computer. Then we press the d…
How to reset the EDC warning light on the Iveco Daily?
How to reset the EDC warning light on the Iveco Daily?
IVECO Daily (2014-2024 / MK 5) The EDC warning light on the Iveco Daily turns on when the oil level in the tank is no longer sufficient and it is necessary to top it up to avoid fu…
Iveco Daily oil warning light reset
Iveco Daily oil warning light reset
IVECO Daily After an oil change, the on-board computer must be reset, otherwise it will continue to signal the need to replace the lubricating fluid. Sitting in …

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos