Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Positioning of the internal fuse box of the Iveco Stralis.

Model: IVECO Stralis
Part: Fuse box

Below we will see the steps that will allow us to locate the internal fuse box of the Iveco Stralis, following the instructions below. First of all, we get on board the cabin and start locating the fuse box, which we find at the bottom on the driver's side; then we use the instruction manual to find the fuse diagram, associated with a code and its corresponding amperage. Now we proceed to replace the faulty fuse with a new one, with the same amperage, using the special pliers with tips, following the video tutorial until the end!

Posted on 21 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Location of the internal fuse box on the Iveco Stralis 450
Location of the internal fuse box on the Iveco Stralis 450
IVECO Stralis In today's video we will see the positioning of the Iveco Stralis 450 internal fuse box. First of all, we get on board the passenger compartment and …
What is the fuse scheme and where is the fuse box of an Iveco Stralis located?
What is the fuse scheme and where is the fuse box of an Iveco Stralis located?
IVECO Stralis (2002-2008 / MK 1) The video attached to this article shows the positioning diagram of all the fuses of our Iveco Stralis. The fuses have the role of preventing damage …
Where are the fuses located in the Iveco Stralis?
Where are the fuses located in the Iveco Stralis?
IVECO Stralis (2002-2019 / MK 1) All the fuses of the Iveco Stralis are located inside the appropriate fuse box: this box is in turn located inside the cabin, immediately below the s…

Remove the Front Door Panel on Mercedes C

Remove the front door panel on Mercedes C to access the window switch assembly. Disconnect the battery terminals in the engine compartment. Use a screwdriver to remove the screws located in the upper lever opening area and the screws in the handle (after removing the plastic screw covers). Remove the trim near the lock, unscrew any remaining screws on the door panel, and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power harness and the opening cable). Unscrew or detach the retaining clips of the window switch assembly.

Watch the video!


by ScegliAuto

More videos