Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on Renault Koleos?

Model: Renault Koleos MK 2 - Years 2016-2024
Part:

The entire operation is managed by the controls available in the vehicle, specifically the buttons on the right side of the steering wheel. Here’s how to do it: turn on the instrument panel, use the directional buttons on the right side of the steering wheel to access the Settings, select the section regarding the tyres, and with the button visible in the video, hold it down for a few seconds to clear the warning. Remember that the only requirement for the warning to turn off is related to the tyre pressure, which must match the values stored in the ECU.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Renault Koleos
Resetting the Tyre Pressure Warning Light on the Renault Koleos
Renault Koleos (2016-2024 / MK 2) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on the Renault Koleos. Before performing the reset, ensure …
How to Reset the Tyre Pressure Warning Light on the Renault Koleos?
How to Reset the Tyre Pressure Warning Light on the Renault Koleos?
Renault Koleos (2016-2024 / MK 2) You can reset the tyre pressure warning light on the Renault Koleos by turning on the instrument panel and inserting the key into the ignition switch…
How to reset the TPMS light on the Renault Koleos
How to reset the TPMS light on the Renault Koleos
Renault Koleos (2016-2024 / MK 2) Today we will explain how to check and adjust the tire pressure on a Renault Koleos vehicle. Before proceeding with the reset of the warning light, i…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos