Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb of the Iveco

Model: IVECO Iveco Various
Part: Headlight bulb

If a front headlamp bulb of the Iveco burns out, replace it as soon as possible for your safety and to avoid penalties. Stand in front of the headlamp containing the bulb to be replaced, remove the panel on the inner side of the headlamp, and locate the two holes on the side of the access steps to the cabin to unscrew the headlamp fixing screws. Once unscrewed, rotate the headlamp. Remove the rubber cover, disconnect the connector, unlock the metal clip, and pull out the old bulb. Insert the new bulb, refit the clip, reconnect the connector, and reposition the cover. Screw in the two screws, using a magnetic-tipped screwdriver to hold the screw in place, and reassemble the panel.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Lights on an Iveco
Replacing Lights on an Iveco
IVECO Iveco Various How do you replace the front headlight bulbs on an Iveco? Remove the central grille before disassembling the headlights if you have trouble removing …
How to Remove the Diesel Filter on Iveco
How to Remove the Diesel Filter on Iveco
IVECO Iveco Various Learn how to remove the diesel filter on an Iveco: lift the front bonnet (where the engine is located), identify the diesel filter as shown in the vi…
How to Replace the Interior Bulb in an Iveco Van
How to Replace the Interior Bulb in an Iveco Van
IVECO Iveco Various The steps required to correctly replace the interior bulb in your Iveco Van are few and straightforward. First, switch off the vehicle completely. Ob…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos