Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : How to change the battery of the Fiat Iveco daily

IVECO Daily - Video tutorial

Model: IVECO Daily MK 3 - Years 1999-2006
Part: Battery
Operation: How to change the battery of the Fiat Iveco daily

On the fourth series of the most widespread and reliable work vehicle ever produced by Iveco, the battery was positioned inside the up and down platform on the driver's side, practically under the seat; to be able to replace it, you must therefore open the door on the driver's side, remove the side cap on the up and down riser and then completely disassemble the plastic covering of the platform; once the plastic cover has been removed, there is enough room for maneuver to proceed with the extraction of the old battery and the installation of the new one: before disconnecting the poles, make sure you have any unlock codes , such as that of the car radio.


Posted on 15 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos