Do it yourself
Frequently asked questions about cars and motorcycles

Diagram and positioning of the internal fuses of the Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Fuse box

Today we will discover the instructions that will allow us to identify the positioning and the internal fuse layout of the Iveco Daily. First of all, we get on board the vehicle, on the driver's side, and start removing the plastic cover next to the steering wheel; we will find the internal fuse box on the back, as shown in the video. At this point, next to the box, we find the sticker indicating the layout and diagram of the fuses, also available in the vehicle's user manual; from the diagram, we will identify the codes and amperages of all the fuses!

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

IVECO Daily (2014-2024 / MK 5) In this brief guide, we will look at the information regarding the layout and positioning of the internal fuse box and the OBD connector of the Iveco…
IVECO Daily (2006-2020 / MK 4) These brief information will show us the positioning and the internal fuse layout on the Iveco Daily, in simple and quick steps. First, we open the f…
IVECO Daily (2006-2020 / MK 4) Today's information will show us the layout and positioning of the internal fuse box of the Iveco Daily. First, we open the front door, driver's side…

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos