Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate Fuses and Understand Schematics in an Iveco Daily

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Fuse box

See other generations:
Video tutorial

To locate the fuses and consult the schematics on an Iveco Daily, open the driver's door and find the first fuse box in the cabin, located under the dashboard or behind a side panel. Remove the plastic cover to access the fuses.

On the inside of the cover, you will find the schematic showing the layout and function of each fuse. Next, open the bonnet and locate the second fuse box in the engine compartment, usually near the battery.

Remove the cover by pressing the side tabs to access the main fuses and relays. There is also a schematic indicating each position.

Use these schematics to quickly identify the fuse corresponding to the component you need to check or replace.


Posted on 19 March 2026 by ScegliAuto


Related tutorials

Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
Where are the Fuses in the Iveco Daily Van?
IVECO Daily In this video, we can see the location of the fuse boxes in the Iveco Daily van and their respective diagrams, useful in case we need to check the st…
Where Can We Find the Fuse Diagram for the Iveco Daily 35.8?
Where Can We Find the Fuse Diagram for the Iveco Daily 35.8?
IVECO Daily (1999-2006 / MK 3) The fuse diagrams for the Iveco Daily 35.8 relate directly to the two fuse boxes present in the vehicle. They allow us to easily identify the exact l…

Other guides you may be interested in

How to Replace the Front Headlamp on the Renault Kadjar?

The front headlamp of the Renault Kadjar, as seen in the video, can be easily replaced, but first, you need to remove the bumper and the wheel arch liner. The headlamp securing pins are mounted at the top and also used at the bottom and rear of the headlamp, which can only be accessed after removing the aforementioned bumper and wheel arch liner. At this point, simply pull the headlight assembly outwards, removing it from its housing, and disconnect the electrical connectors for the bulbs.

Watch the video!


by ScegliAuto

More videos