Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on Jeep Patriot

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Shift knob

Video tutorial

Replace the gear knob on your Jeep Patriot. Follow these steps for removal: first, remove the leather gaiter frame using a plastic lever (which covers the gear lever).

Then, grasp the knob with both hands and rotate it left and right until it comes off the gear stick. For installation: take the new knob and slide it onto the shaft in the centre console, tightening it until fully threaded.

Finally, test the correct installation of the knob by moving the shaft in the centre console.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to remove the gear knob from a Jeep Patriot
How to remove the gear knob from a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) After various maintenance tasks and due to usage over time, the gear knob of any vehicle can become damaged, especially if made from low-quality mate…
Replacing the Gear Knob on a Jeep Patriot
Replacing the Gear Knob on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) As with many other Jeep models, removing the gear knob is a straightforward task. Although many believe there are specific procedures for this remova…
How to Remove the Centre Dashboard Panel of the Jeep Patriot?
How to Remove the Centre Dashboard Panel of the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) To remove the centre dashboard panel of the Jeep Patriot, you need to unscrew the gear knob so that it can be removed from the gear lever. This will …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos