Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

Need advice on how to remove the radio from your Jeep? You're in the right place. Park the car with the handbrake on in a location that does not obstruct anyone.

Start by removing the cover at the base of the gear lever, using a lever. Inside the opened compartment, you will find two screws to unscrew; after removing them and keeping them safe, detach this plastic piece as well.

Now you need to remove the part of the dashboard under the windscreen, so you can access the panel that would otherwise be blocked. Pull the rear part upwards first and slide it out, unscrew the two screws found underneath.

Pull towards you the plastic grille. Finally, access the radio, secured only by 4 screws.

Proceed with the replacement with the new part. Reassemble everything in reverse order.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to disassemble the radio of the Jeep Compass 2
How to disassemble the radio of the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If the factory car radio in the interior of your second series Jeep Compass has suddenly stopped working and you want to find out how to safely and q…
How to Remove the Car Radio in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, see how to remove the car radio in the Jeep Compass MK2, whether it is damaged or if you need to access something inside the …
How to Replace the Radio in the Jeep Compass?
How to Replace the Radio in the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the radio in the Jeep Compass, use a tool to pry off the plastic cover surrounding the radio and climate control. Once the cover is remove…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos