Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

To completely eliminate the tyre pressure light from the Jeep Compass dashboard, first inflate the tyres to the correct pressure value: this value will be indicated on the sticker attached to the driver’s door pillar. Once all the tyres are inflated to the correct pressure, activate the dashboard and check the value from the onboard computer; if the tyre pressure light remains on after inflating, drive a few metres so the sensors can read the new values.


Posted on 14 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass
How to Reset the Tyre Pressure Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow the main steps to reset the tyre pressure warning light on the Jeep Compass. Before starting the operation, ensure all four tyres are at the c…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affi…

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos