Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

Follow the main steps to reset the tyre pressure warning light on the Jeep Compass. Before starting the operation, ensure all four tyres are at the correct operating pressure.

Then, get inside the vehicle and connect your diagnostic tool to the ECU port. Following the guided procedure and selecting the vehicle data, you will see how to reset the tyre pressure monitoring system (TPMS) warning light.

Finally, check that the pressure warning is completely cleared from the instrument cluster!


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Jeep Compass?
How to reset the tyre pressure warning light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, turn on the instrument cluster and identify the tyre with insufficient pressure: at thi…
How to reset the tyre pressure warning light on a Jeep Compass?
How to reset the tyre pressure warning light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, first ensure the tyres are inflated to the correct pressure. This value is found on the…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos