Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Osram Night Breaker LED H4 Retrofit Approved Bulbs

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Light bulb

Video tutorial

Osram Night Breaker LED H4 bulbs are legally approved only for certain car models listed in Osram's official compatibility list. Before purchasing them (for example, on Amazon with code B0D4QT2YGM at a price of £24.18 per pair, with free delivery for Prime customers), check that your car (make and model) is included in the list of approved vehicles.

The video shows a Jeep Renegade, which is approved. On your car's headlamp unit, look for the approval number etched on the lens (usually on the inner edge).

Compare it with the one indicated on the Osram site or the bulb packaging. Only if the code matches can you be sure that the bulb is legally approved for your vehicle.

These steps are essential to comply with road regulations. Then open the bonnet, remove the rubber protective cap, disconnect the electrical connector, remove the halogen bulb, insert the Night Breaker LED H4 into its housing, reconnect the electrical connector, and close the rear cap. Turn on the headlights and check for any error messages on the dashboard.

Osram provides a sticker to apply to the headlamp to visually confirm that the lamp is equipped with approved retrofit LED bulbs, useful in case of inspections.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the original halogen bulbs in a Jeep Renegade with new LED bulbs, first open the bonnet and access the rear of the light corresponding to …
How to Remove the Interior Light on a Jeep Renegade
How to Remove the Interior Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Here’s how to remove and replace the bulbs/LEDs in the interior light of a Jeep Renegade: use a screwdriver or plastic lever to pry between the cover…
How to Replace the Number Plate Light Bulbs in the Jeep Renegade?
How to Replace the Number Plate Light Bulbs in the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) As you can see in this tutorial, replacing the number plate light bulbs in the Jeep Renegade is a very simple and quick operation. First, ensure that…

How to Activate and Deactivate Cruise Control on the Opel Astra

Today, we will go through the steps to activate and deactivate the cruise control system on the Opel Astra, as well as on the Opel Zafira and Insignia. First, get inside the vehicle and start the engine; to activate the cruise control, you need to reach a certain minimum speed, using the controls found on the right side of the steering wheel to activate the cruise control system. Then press the right button to activate it and select the speed using the selector; simply press the brake pedal or the cruise control activation/deactivation button to disable it.

Watch the video!


by ScegliAuto

More videos