Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlamp Bulb on a 2016 Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Headlight bulb

Let’s see how to disassemble and replace the headlamp bulb on a 2016 Jeep Cherokee, fourth series, in simple and quick steps. To access the headlamp bulb, unscrew the screws of the front wheel arch liner to remove it just enough to access the bulb; then remove the protective cap of the bulb and disconnect its electrical connector, removing the bulb. At this point, replace it with a new one of the correct type; all that’s left is to insert it back in and reassemble everything, applying the reverse procedure!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) Today's step-by-step instructions will guide you through removing and replacing the headlamp bulb on the Jeep Cherokee. First, move to the side and s…
Jeep Cherokee (2013-2023 / KL, MK 5) Here’s how to replace the front headlamp bulb in a Jeep Cherokee. First, turn the corresponding front wheel inwards towards the headlamp where the bu…
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the front headlight bulbs on the Jeep Cherokee, lift the bonnet and remove the air filter to access the right bulb and the battery to acce…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos