Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2018 Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this tutorial video, you will see the necessary instructions to reset the service light for the routine maintenance oil change on the 2018 Jeep Renegade. First, get into the vehicle and press the brake and accelerator pedals simultaneously, as shown in the video; then turn on the ignition and release the brake pedal, but not the accelerator, pressing it seven times. At this point, turn off the ignition again, keeping both pedals pressed, and wait for thirty seconds; then simply turn the ignition back on and check that the light has reset correctly!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
How to Reset the Service Light on a Jeep Renegade
How to Reset the Service Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Here’s how to reset the service light on a Jeep Renegade. To reset the maintenance service light, turn on the vehicle's instrument cluster, use the b…
How to reset the oil light on a 2019 Jeep Renegade
How to reset the oil light on a 2019 Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) After changing the oil, it is important to complete the operation by resetting the oil indicator light; to perform this operation on a 2019 Jeep Rene…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos