Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years 2007-2018
Part: Air filter

Let's see in this short and simple guide how to remove and replace the Jeep Wrangler engine air filter. First of all, we open the bonnet of our car and start by disconnecting the intake sleeve of the air filter box, by unscrewing the clamp screw; after that we go to remove the cover of the filter box, as shown in the video. At this point we remove and replace the filter with the new one, of the right type; insert it in the correct direction and reassemble everything, correctly fixing the filter box cover and the intake duct.

Posted on 5 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / MK 4, JL) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to replace the air filter on the Jeep Wrangler 3
How to replace the air filter on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) The engine air filter inside your third series Jeep Wrangler (year 2008-2018) must be replaced periodically in order to avoid any abnormal overheatin…
How to replace the air filter in the Jeep Wrangler?
How to replace the air filter in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this video we can see how to replace the air filter in the Jeep Wrangler, a very simple and fast operation. After getting the right replacement fi…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos