Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on a Jeep Cherokee 2.4L

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Spark plugs

In today's tutorial, you will see the instructions to remove and replace the spark plugs in the engine of the Jeep Cherokee with a 2.4-litre engine. First, open the bonnet and start by removing the plastic cover above the cylinder head, then disconnect the intake hose. Next, disconnect the electrical connectors or the spark plug leads and use a socket wrench with an extension to unscrew and remove them, as shown in the video. At this point, replace the old spark plugs with new ones of the same heat rating!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) In this guide, discover the instructions that will allow you to remove and replace the engine spark plugs on the Jeep Cherokee 2.4L. First, open the …
Jeep Cherokee (1984-2001 / XJ, MK 2) In this guide, discover how to remove and replace the engine spark plugs in the Jeep Cherokee, following the instructions below. First, open the bonn…
…

Other guides you may be interested in

What Does the "Code 60" Message Mean in the Opel Meriva?

If the "Code 60" message has appeared on the dashboard of your Opel Meriva, it means that the passenger side window is not calibrated correctly. This issue can arise, for example, after disconnecting or replacing the battery, as the control unit for the various devices will lose the stored data. To remove the warning from the dashboard, simply turn on the ignition, fully open the window, and then close it. This procedure is also valid for the driver's window if the "Code 59" message appears.

Watch the video!


by ScegliAuto

More videos