Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the spark plugs on the Jeep Cherokee 2.4L

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Spark plugs

In this guide, discover the instructions that will allow you to remove and replace the engine spark plugs on the Jeep Cherokee 2.4L. First, open the bonnet of the vehicle and start disconnecting the connectors of the spark plug coils; then use a socket spanner with an extension to unscrew and remove each spark plug one by one, as illustrated in the video. At this point, install the new spark plugs, of the correct type and with the same thread pitch; hand-tighten them and then tighten with a spanner (preferably a torque wrench), reconnect the coil connectors and start the engine!

Posted on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs in the Jeep Cherokee
How to Replace the Spark Plugs in the Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) In this guide, discover how to remove and replace the engine spark plugs in the Jeep Cherokee, following the instructions below. First, open the bonn…
How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) In today's tutorial, you will see the instructions to remove and replace the spark plugs in the engine of the Jeep Cherokee with a 2.4-litre engine. …
Replacing Spark Plugs on a Jeep Cherokee
Replacing Spark Plugs on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) With the vehicle stationary and the engine off, open the bonnet. Lift the engine cover by raising the corners. As shown in the video, disconnect and …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos