Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Spark plugs

See other generations:
Video tutorial

With the vehicle stationary and the engine off, open the bonnet. Lift the engine cover by raising the corners.

As shown in the video, disconnect and remove the PVC pipe located at the front of the engine bay to create more working space, then disconnect the pipe located at the rear of the engine. Finally, detach the two pipes with connectors (one white and one black) using a flat screwdriver.

Remove the engine cover by unscrewing the 8 mm bolts, then take out the ignition coils and use a long 10 mm socket to unscrew the spark plugs. Reverse the steps for reassembly.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the spark plugs on the Jeep Cherokee 2.4L
Replacing the spark plugs on the Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) In this guide, discover the instructions that will allow you to remove and replace the engine spark plugs on the Jeep Cherokee 2.4L. First, open the …
How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) In today's tutorial, you will see the instructions to remove and replace the spark plugs in the engine of the Jeep Cherokee with a 2.4-litre engine. …
Replacing the Radiator of the Jeep Cherokee
Replacing the Radiator of the Jeep Cherokee
Jeep Cherokee (1984-2001 / MK 2, XJ) This guide covers the procedure to remove and replace the cooling radiator of the Jeep Cherokee. First, lift the vehicle and begin disconnecting the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos