Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs in the Jeep Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Spark plugs

In this guide, discover how to remove and replace the engine spark plugs in the Jeep Cherokee, following the instructions below. First, open the bonnet and disconnect the electrical connectors or leads from the spark plugs; then use a 16 mm socket with an extension to unscrew and remove the spark plugs, as shown in the video. At this point, replace the spark plugs with new ones of the correct type and heat rating; then hand-tighten before securing with the wrench, following the video until the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
How to Replace the Spark Plugs on a Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) In today's tutorial, you will see the instructions to remove and replace the spark plugs in the engine of the Jeep Cherokee with a 2.4-litre engine. …
Replacing the spark plugs on the Jeep Cherokee 2.4L
Replacing the spark plugs on the Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) In this guide, discover the instructions that will allow you to remove and replace the engine spark plugs on the Jeep Cherokee 2.4L. First, open the …
Replacing Spark Plugs on a Jeep Cherokee
Replacing Spark Plugs on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) With the vehicle stationary and the engine off, open the bonnet. Lift the engine cover by raising the corners. As shown in the video, disconnect and …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos