Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

Video tutorial

Open the door and access the driver’s seat, then close all doors. On the dashboard, below the rev counter, the orange tyre pressure warning light is illuminated.

Insert the key and start the engine. On the left side of the steering wheel, locate the up and down arrows, and press them until you reach the "messages" menu.

Press and hold the "OK" button located between the arrows on the left side of the steering wheel until the message "reset completed" appears. To verify the alarm has been cleared, turn off and restart the engine.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…
How to Reset the TPMS Light on the Jeep Renegade
How to Reset the TPMS Light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) If you notice the TPMS light on the instrument cluster of your Jeep Renegade stays on when you start the vehicle, despite no puncture being present, …
How to Reset the TPMS Light on a Jeep Renegade
How to Reset the TPMS Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the TPMS light on a Jeep Renegade, first ensure that the pressure of all tyres is correct according to the manufacturer's specifications. Tu…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos