Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee ZJ, MK 1, ZG - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: V-belt

See other generations:
Video tutorial

This guide provides the main instructions for removing and replacing the serpentine belt of the Jeep Grand Cherokee. First, open the bonnet of your car and begin to loosen the tensioner of the serpentine belt; use a 15 mm socket, as shown in the video.

Next, remove the belt from the pulleys and replace it with a new one, using the original part. Install it in the correct direction between the pulleys, reassemble everything, loosening the tensioner and releasing it once the belt is perfectly seated in all areas!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Panel on a Jeep Grand Cherokee
How to Remove the Window Switch Panel on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before you begin, open the driver's door of your Jeep Grand Cherokee. Using a thin but sturdy tool as a lever, start by unclipping the window switch …
How to Replace the Cabin Filter on Jeep Grand Cherokee?
How to Replace the Cabin Filter on Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the cabin filter on the Jeep Grand Cherokee, open the glove compartment from the passenger side and push sideways so that the compartment …
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos