Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt of the Jeep Compass Mk1

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

This guide shows how to replace the timing belt of the Jeep Compass. After safely lifting the front of the vehicle, remove the right wheel and open the bonnet.

Using a 16mm spanner, unscrew the retaining bolt of the tensioner pulley and slide off the old timing belt. Insert the new timing belt, carefully following the installation diagram.

Loosen the belt tensioner again to fit it onto the last pulley. Check the correct positioning of the belt and reassemble the wheel.

Lower the vehicle and check the proper operation of the vehicle.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Jeep Compass Multijet
Replacement of the timing belt of the Jeep Compass Multijet
Jeep Compass (2016-2025 / 552, MK 2) Let's discover the information that will allow us to dismantle and replace the timing belt of the Jeep Compass, with a diesel engine (Multijet). To a…
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Jeep Compass (2016-2025 / 552, MK 2) In this guide, we will see the information related to the disassembly and replacement of the timing belt of the Jeep Compass 1.4 MultiAir. In order t…
How to Replace the Timing Belt on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the timing belt on a Jeep Compass, loosen the bolts securing the front right wheel and the corresponding wheel arch. Once these parts are …

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos