Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a Jeep Renegade (2015)

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

Video tutorial

Have you done a DIY oil change and now need to reset the service light? Here’s how to do it. The procedure is very simple and quick, but remember to do it only if you have actually replaced the oil; it is a vital fluid for the engine, and proper replacement at regular intervals (annual or mileage-based) helps keep your car running efficiently.

With that said, let’s go through the necessary steps to turn off the light.

To reset the oil light, get in the car and turn on the ignition (without starting the engine). At this point, the light indicating the need to replace the oil will appear.

Now press the accelerator pedal all the way down three times, completing the operation in less than 5 seconds. Turn off the ignition, and if the procedure was successful, the message will not appear when you restart the car.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to Reset the Oil Warning Light on the 2020 Jeep Renegade
How to Reset the Oil Warning Light on the 2020 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) This guide explains how to manually reset the engine oil warning light on your 2020 Jeep Renegade. First, get into the driver's seat and turn on the …
How to Reset the Oil Light on a 2017 Jeep Renegade
How to Reset the Oil Light on a 2017 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To manually reset the engine oil light on your 2017 Jeep Renegade, follow these steps. First, get into the car and reach the driver's seat, then turn…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos