Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Renegade?

Model: Jeep Renegade - Years 2014-2021
Part: Service warning light

Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To reset, turn on the instrument cluster, not the engine, and fully press the accelerator pedal three times. After this, turn off and then turn on the instrument cluster again. If the procedure has been executed correctly, the service light will no longer be present at the next ignition, and you can check the interval in the maintenance menu.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Jeep Renegade
How to Reset the Oil Change Light on the Jeep Renegade
Jeep Renegade (2014-2021 / ) If you have just changed the oil in your new 2022 Jeep Renegade, but the warning message keeps appearing on the dashboard display, you need to perfor…
Oil Change Reset Procedure for the Jeep Renegade
Oil Change Reset Procedure for the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, you will see how to reset the oil change light after performing an oil change on a Jeep Renegade. First, if the vehicle is on, turn it…
How to Reset the Oil Service Light in a Jeep Renegade
How to Reset the Oil Service Light in a Jeep Renegade
Jeep Renegade (2014-2021 / ) In this video, you can see how to reset the oil service light in a Jeep Renegade, a very simple operation that should only be done after changing the…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos