Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change Reset Procedure for the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Checks and maintenance

In this video, you will see how to reset the oil change light after performing an oil change on a Jeep Renegade. First, if the vehicle is on, turn it off. Now, turn on the ignition without starting the engine and without pressing the accelerator; instead, press the accelerator three times. The oil change light should now be off, allowing you to start the engine. You will only see a low fuel level warning if the fuel tank is low. This operation is indeed very simple.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Warning Light on the Jeep Renegade
How to Reset the Engine Oil Warning Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This video tutorial shows the simple procedure to reset the oil warning light on the 2017 Jeep Renegade. The procedure is very straightforward: first…
How to Change the Automatic Gearbox Oil on a Jeep Renegade
How to Change the Automatic Gearbox Oil on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today, see how to change the automatic gearbox oil on a Jeep Renegade; the same procedure can also be used on a Jeep Compass. First, lift the vehicle…
How to reset the oil light on the Jeep Renegade
How to reset the oil light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this article, we show you how to reset the oil change light, or the service light, of the Jeep Renegade in case the reset is not performed by the …

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What does the "side distance warning not available" message mean in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - How to deactivate the Start / Stop in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What does the Jeep Renegade "Start & Stop not available" mean? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos