Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to reset the oil change light on the Jeep Renegade

Jeep Renegade - Video tutorial

Model: Jeep Renegade - Years 2014-2021
Part: -board computer
Operation: How to reset the oil change light on the Jeep Renegade

If you have just changed the oil on your new Jeep Renegade 2022, but the alarm message continues to appear on the on-board computer display then you need to perform a manual reset. First, place the automatic gearshift lever on "P" and turn on the vehicle's ignition. Then press the accelerator pedal three consecutive times (within ten seconds) and switch off the ignition. At this point the reset is complete and from the next start the alarm message relating to the oil change will no longer appear. In case of errors you can repeat the whole procedure without any problem.


Posted on 22 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - How to reactivate the parksense of the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What is the function of the passive entry system in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the red flash on the dashboard of a Jeep Renegade mean? Read Answer
    • Jeep Renegade 2014-2023 - Why is the Jeep Renegade UConnect system not working? Read Answer
    • Jeep Renegade 2014-2023 - What causes the Jeep Renegade anti-collision system problem? Read Answer
    • Jeep Renegade 2014-2023 - What to do when the Jeep Renegade Passive Entry system does not work? Read Answer
    • Jeep Renegade 2014-2023 - Why did the audio system stop working in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the orange engine light mean in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why doesn't My Uconnect from the Jeep update itself? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos