Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in a Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

Video tutorial

In this video, you can see how to reset the oil service light in a Jeep Renegade, a very simple operation that should only be done after changing the oil and the corresponding filter. First, turn on the ignition, not the engine, then press the accelerator pedal fully three times within about 10 seconds.

Once done, switch off and turn on the ignition again to check if the procedure was successful. If it does not work, repeat the operation, ensuring you press the accelerator within the 10 seconds.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the oil light on your Jeep Renegade, simply follow this guide step by step. First, enter the cabin and turn on the instrument panel, then pr…
How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by pressing the vehicle's ignition button once to activate the instrument clu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos