Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2020 Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In the following guide, we will explain how to manually reset the engine oil light on the dashboard of your Jeep Renegade (2020). First, sit in the driver's seat and turn on the ignition, then turn it off and press the accelerator pedal five times in a row. Once you have done this, turn on the ignition of your Jeep Renegade again and the oil light reset is successfully completed. If there are any errors during the procedure, don't worry because you can simply turn off the ignition and start over. From the next start after the reset, the oil light will no longer be displayed.

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Engine Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This brief guide will show you how to reset the engine oil light on a Jeep Renegade; it also demonstrates how to perform the routine maintenance serv…
How to reset the oil light on the 2020 Jeep Renegade
Jeep Renegade (2014-2023 / ) Resetting the oil light on the 2020 Jeep Renegade is a simple and quick process to be done independently. First, turn on the vehicle's instrument pan…
How to Reset the Oil Light on a 2017 Jeep Renegade
How to Reset the Oil Light on a 2017 Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To manually reset the engine oil light on your 2017 Jeep Renegade, follow these steps. First, get into the car and reach the driver's seat, then turn…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos