Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Air Filter on the 2018 Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

Video tutorial

In this video, you will see how to replace the cabin air filter on your Jeep Renegade and, in some cases, eliminate the annoying noises you hear when the fan is running. Gather a screwdriver or drill with a T25 Torx bit and remove the screws under the glove compartment, those inside at the top, and the side ones behind the small plastic cover.

Use your phone's camera to inspect the inside of the fan and ensure there are no objects present that could create noises, such as leaves or pine cones. Install the new filter, checking that the airflow direction marked on the replacement matches that of the vehicle (the fan is always upstream).

Proceed in reverse for reassembly, and you're done: great job!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Jeep Renegade (2014-2026 / MK 1, BU, 520) How to remove the cabin filter on a Jeep Renegade? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a lever;…
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow this guide to replace the cabin air filter (pollen filter) on a Jeep Renegade. Pull off the plastic cover located on the right side of the das…
Jeep Renegade (2014-2026 / MK 1, BU, 520) How to replace the pollen filter on a Jeep Renegade? Unscrew the screws located on the right side of the dashboard, then remove the glove compartment…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos