Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Engine oil

Follow this guide to replace the cabin air filter (pollen filter) on a Jeep Renegade. Pull off the plastic cover located on the right side of the dashboard; open the glove compartment and unscrew the securing screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment after disconnecting the power cables. Remove the cover plug and slide out the pollen filter from its housing (as shown in the video). Finally, insert the new filter and reassemble all components of the glove compartment as they were disassembled.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Jeep Renegade
How to Replace the Cabin Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the cabin filter on a Jeep Renegade? Start by opening the glove compartment and unfastening the plastic guides on either side of t…
How to Remove the Cabin Filter on a Jeep Renegade
How to Remove the Cabin Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the cabin filter on a Jeep Renegade? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a lever;…
How to Replace the Pollen Filter on a Jeep Renegade
How to Replace the Pollen Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) .. How to replace the pollen filter on a Jeep Renegade? Unscrew the screws located on the right side of.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos