Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

This guide shows you how to reset the engine oil light on the Jeep Renegade by following the instructions below. First, get in the vehicle and turn on the ignition; then connect your diagnostic software to the OBD port of your car, as illustrated in the video.

At this point, perform a scan for errors, following the procedure indicated to confirm the reset of the engine oil light; you will see that the light itself will be reset on the instrument panel. It is also possible to manually reset the service!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to Reset the Oil Warning Light on the 2020 Jeep Renegade
How to Reset the Oil Warning Light on the 2020 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) This guide explains how to manually reset the engine oil warning light on your 2020 Jeep Renegade. First, get into the driver's seat and turn on the …
How to Reset the Oil Light on a 2017 Jeep Renegade
How to Reset the Oil Light on a 2017 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To manually reset the engine oil light on your 2017 Jeep Renegade, follow these steps. First, get into the car and reach the driver's seat, then turn…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos