Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Power Steering Fluid in a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Checks and maintenance

In this tutorial, see how to top up the power steering fluid in a Jeep Grand Cherokee, a very simple and quick operation. First, ensure the vehicle is off, then open the bonnet and locate the reservoir for the fluid, situated on the left side of the engine bay just behind the filter box. Next, unscrew the large cap and add the required amount of MS-11655 fluid until it reaches the "MAX" mark. Once done, tighten the cap, start the vehicle, and test the power steering.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Jeep Grand Cherokee?
Where is the OBD port located in the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / MK 5, WL) If you want to discover where the OBD port of your new Jeep Grand Cherokee is located, all you have to do is follow the steps described in our new gu…
How to Open the Remote of a Jeep Grand Cherokee
How to Open the Remote of a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…
How to check the engine oil level of the Jeep Grand Cherokee 3.6L VVT
How to check the engine oil level of the Jeep Grand Cherokee 3.6L VVT
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) This brief guide will show us the necessary information to check the correct level of engine oil on the Jeep Grand Cherokee with a 3.6L VVT engine. F…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos