|
Do it yourself
| |||
| ||||
How does the Selec Terrain of the Jeep Compass MK2 work?
Model: Jeep Compass
552, MK 2
- Years 2016-2025
What is the purpose and how do you use the Select Terrain of the Jeep Compass MK2? It is a system of all-wheel drive that allows us to adapt the car to different types of terrain, optimizing traction and stability. It acts on various parameters of the vehicle, such as throttle response, gear management, torque distribution, and traction control. The modes include "auto" which is the default mode, ideal for everyday driving; "snow" to tackle snowy or icy roads, optimizing traction and reducing the risk of slipping; "sand" to tackle sandy terrain, allowing slight wheel slippage to move forward without getting stuck; "mud" to tackle mud or rough terrain, maximizing traction and helping to overcome obstacles; and finally "rock" to tackle rocky paths: optimizes traction at low speeds and allows you to overcome difficult obstacles. The selector is located on the center console, we select the condition we are in and confirm, and remember: the Select Terrain is an aid, but it does not replace caution and attention while driving.
Posted on 3 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Jeep Compass
(2016-2025 /
552, MK 2)
To replace the front headlamp bulb on a Jeep Compass, open the bonnet to access the components inside the engine bay. Inside the headlamp, locate the…
Jeep Compass
(2016-2025 /
552, MK 2)
Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
Jeep Compass
(2016-2025 /
552, MK 2)
You can replace the rear wiper blade on a Jeep Compass by lifting the blade to ensure it is no longer in contact with the rear window: once the blade…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.144
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |