Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Uconnect System on the Jeep

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

Video tutorial

If there are malfunctions or freezes requiring a reset of the infotainment system, follow this simple procedure: enter the cabin and sit in the driver's seat, turn on the ignition (do not start the engine), and locate the two control knobs under the touch display: one for volume on the left and one for radio frequency selection on the right.

Press and hold both buttons simultaneously for at least 5 seconds.

The system will then turn off and restart the application. Wait for it to fully load and press "accept". This will reset the system.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Use uConnect Live on the Jeep Renegade
How to Use uConnect Live on the Jeep Renegade
Jeep Renegade (2014-2021 / ) The uConnect Live system on the Jeep Renegade allows you to view your driving performance through a graph. With this system, you can connect your mob…
How to Activate the uConnect System on a Jeep Renegade
How to Activate the uConnect System on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To activate the uConnect system on the Jeep Renegade, enable Bluetooth on your smartphone, ensuring that the device is visible. Then, go to the uConn…
How to Update the Uconnect System in the Jeep Renegade
How to Update the Uconnect System in the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today’s video, we will see how to update the multimedia system of the Jeep Renegade; specifically, the map updates in the Uconnect system of the F…

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos