Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fuel tank on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove the fuel tank on a Jeep Grand Cherokee, a task that requires good manual skills. First, disconnect the negative terminal of the battery, then go underneath the vehicle, locate the mounting bracket, and using an 18mm socket, unscrew all the relevant bolts.

Next, disconnect the two fuel lines at the front, proceed with the rear line, and remove the entire support. At this point, you can transfer any devices from the old tank, such as the old pump, and follow the reverse procedure.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump in a Jeep Grand Cherokee
How to Replace the Fuel Pump in a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) To replace the fuel pump in a Jeep Grand Cherokee, lift the vehicle to loosen the protection panel at the rear underside. Protected by this panel, th…
How to remove the fuel tank from the Jeep Grand Cherokee
How to remove the fuel tank from the Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this video tutorial, you can see how to remove the fuel tank from a Jeep Cherokee. First, secure the vehicle, then lift the bonnet and secure it w…
Instructions for Replacing the Fuel Pump on a Jeep Grand Cherokee
Instructions for Replacing the Fuel Pump on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this video tutorial, follow the instructions on how to replace the fuel pump on a second-generation Jeep Grand Cherokee. To remove it, take out th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos