Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years 1998-2004
Part: Fuel pump

To replace the fuel pump in a Jeep Grand Cherokee, lift the vehicle to loosen the protection panel at the rear underside. Protected by this panel, there is the fuel tank. You will need to remove it from its housing by unscrewing the screws that hold it and disconnecting the connectors. At the top of the tank, you will find the fuel pump, which can be extracted from its housing by freeing it from its fixing screws and associated pipes. Then, insert the new pump, remounting all previously disassembled components.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Fuel Pump on a Jeep Grand Cherokee
Instructions for Replacing the Fuel Pump on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this video tutorial, follow the instructions on how to replace the fuel pump on a second-generation Jeep Grand Cherokee. To remove it, take out th…
How to Remove and Replace the Fuel Filter on a Jeep Grand Cherokee
How to Remove and Replace the Fuel Filter on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let's see how to remove and replace the fuel filter on a Jeep Grand Cherokee: lift the car on a column lift or with a suitable jack, locate the fuel …
Diesel Filter Replacement on Jeep Grand Cherokee
Diesel Filter Replacement on Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To replace the diesel filter on a Jeep Grand Cherokee, follow these steps. Open the car's door and pull up the engine compartment release lever locat…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos