Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Jeep Compass, first inflate the tyres to the correct pressure, as indicated on the sticker attached to the driver's door pillar. Once the tyres are correctly inflated, connect a diagnostic tool to the vehicle's OBD port, located under the steering column. This will allow you to reset the error causing the warning light to illuminate. Disconnect the scanner and turn off the ignition.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on a Jeep Compass?
How to reset the tyre pressure warning light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, first ensure the tyres are inflated to the correct pressure. This value is found on the…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How do you reset the tire pressure light on the Jeep Compass?
How do you reset the tire pressure light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In order to make the tire pressure warning light disappear from the instrument panel of the Jeep Compass, you will first need to adjust the tires to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos