Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Touchscreen of the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Car stereo

Whether it’s this vehicle or any other, the method is the same as shown in this video. It demonstrates how to replace the screen after removing it from the dashboard. Apply adhesive tape on both long sides, remove the six rear screws, use a flathead screwdriver to pry on the front metal frame, disconnect the flat multi-wire cables, and extract the screen from its housing. With the new screen, apply the reverse procedure, reassembling everything in place, and finally remove the previously mentioned tape.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Compass (2016-2025 / 552, MK 2) In this video, you will learn how to change the language on the Jeep Compass onboard computer: you can do this from the menu, but first, you need to …
Jeep Compass (2006-2016 / MK 1, MK 49) In this tutorial we can see how to reset the onboard computer in the Jeep Compass, an extremely simple and fast operation, to be carried out for exam…
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, you can see how to adjust the brightness of the main display on the Jeep Compass, a very simple and quick operation to adapt it to …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos