Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Kawasaki Ninja?

Model: Kawasaki Ninja 636
Part: Engine oil

Video tutorial

To replace the engine oil on your Kawasaki Ninja, first ensure the engine is cold. Gently lift the bike onto a stand to facilitate the work.

Next, remove the oil filler cap and the oil drain plug. Make sure to place a drain container under the drain plug to collect the used oil. Now carefully unscrew the drain bolt and allow the old oil to completely drain out. Once the draining is finished, securely reattach the drain bolt.

Proceed to fill the engine with the recommended new oil. By following these steps, you will have successfully completed the engine oil change on your Kawasaki Ninja.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Kawasaki Ninja 636
How to Change the Engine Oil on the Kawasaki Ninja 636
Ninja 636 You can perform the engine oil change on the Kawasaki Ninja 636 by loosening the drain plug located at the central lower part of the vehicle: once th…
How to Replace the Clutch on a Kawasaki Ninja 600 - 636
How to Replace the Clutch on a Kawasaki Ninja 600 - 636
Ninja 636 In this video tutorial, you will see the main instructions for disassembling and replacing the clutch on the Kawasaki Ninja 600, as well as the 636. …
Removing the Seat of a Kawasaki Ninja ZX6R 636
Removing the Seat of a Kawasaki Ninja ZX6R 636
Ninja 636 In this video, we will see how to remove the seat of a Kawasaki Ninja ZX6R 636 in simple steps. First, unscrew the side plastic screw with a screwdri…

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos