Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Kawasaki Ninja 600 - 636

Model: Kawasaki Ninja 636
Part: Clutch

Video tutorial

In this video tutorial, you will see the main instructions for disassembling and replacing the clutch on the Kawasaki Ninja 600, as well as the 636. First, remove the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then remove the clutch cover located on the right by unscrewing all the fastening screws on the sides.

Next, unscrew the central screws of the clutch pack to remove the aluminium disc, then slide out all the cork discs; finally, replace them with new ones!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Kawasaki Ninja 636
How to Change the Engine Oil on the Kawasaki Ninja 636
Ninja 636 .. the engine oil change on the Kawasaki Ninja 636 by loosening the drain plug located at the central lower part of the vehicle: once the plug has.. …
Removing the Seat of a Kawasaki Ninja ZX6R 636
Removing the Seat of a Kawasaki Ninja ZX6R 636
Ninja 636 .. how to remove the seat of a Kawasaki Ninja ZX6R 636 in simple steps. First, unscrew the side plastic screw with a screwdriver to remove it. Then, remove.. …
How to Change the Engine Oil on a Kawasaki Ninja?
How to Change the Engine Oil on a Kawasaki Ninja?
Ninja 636 To replace the engine oil on your Kawasaki Ninja, first ensure the engine is cold. Gently lift the bike onto a stand to facilitate the work. Next, re…

How to replace the piston on the Peugeot Django?

To replace the piston on the Peugeot Django, you need to completely dismantle the side fairings located under the seat: by removing these panels, you will gain access to the engine, which can be extracted from its housing by unscrewing the fixing screws and disconnecting the connectors attached to it. Once the engine is free, loosen the bolts that secure the cylinder at the top, remove the cylinder, and then detach the piston from the corresponding connecting rod. At this point, you can insert the new piston, cover it with the cylinder, and reinstall the engine in its place.

Watch the video!


by ScegliAuto

More videos