Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front windshield of a Kawasaki Versys?

Model: Kawasaki Versys 1000
Part: Checks and maintenance

Video tutorial

To remove the front windshield of a Kawasaki Versys, start by removing the fastening screws on the upper panel of the fairing using an appropriate wrench or screwdriver. Make sure to keep the screws in a safe place for reassembly later.

Next, look for and remove any screws or bolts located on the lower side of the front windshield, usually near the windshield or the top of the fork. Once all the screws have been removed, grab the front windshield with both hands and gently lift it upwards to detach it from the mounting brackets.

Once the windshield has been removed, you can perform any necessary repairs or modifications.


Posted on 25 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Tyre of the Kawasaki Versys 1000
How to Replace the Front Tyre of the Kawasaki Versys 1000
Versys 1000 This guide will show you the steps to remove and replace the front tyre of the Kawasaki Versys 1000 motorcycle. First, place the motorcycle on its ce…
How to Remove the Front Wheel on a Kawasaki Versys 1000
How to Remove the Front Wheel on a Kawasaki Versys 1000
Versys 1000 In this tutorial, you will see how to remove the front wheel on a Kawasaki Versys 1000, a very simple and quick operation. First, position yourself i…
How do you replace the exhaust pipe of the Kawasaki Versys 1000?
How do you replace the exhaust pipe of the Kawasaki Versys 1000?
Versys 1000 It will be possible to replace the exhaust installed on the Kawasaki Versys 1000 by loosening the screws that fix the exhaust terminal to its housing…

How to Change the Engine Oil on a Yamaha SMAX 150 Scooter?

In this tutorial, see how to change the engine oil on a Yamaha SMAX 150 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool. Then, position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then remove the oil filter cap and clean it of any residue. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos